StarTech.com LP4 naar 2x LP4 Power Y-splitterkabel M/F

The StarTech.com Power Splitter Cable LP4 to 2x LP4 (model PYO2L) lets you connect two LP4 (Molex 4-pin) peripheral devices to a single LP4 power connector from your computer power supply. The compact 0.23 m cable splits one male LP4/Molex plug into two LP4 female sockets, enabling simple expansion of internal power connections for devices such as CD/DVD-ROM drives and IDE hard drives.

Advantages

This LP4 to 2x LP4 power Y splitter frees up power supply connections by allowing two devices to share a single LP4 connector. The cable uses standard Molex (4-pin) interfaces for compatibility with common internal PC peripherals. It is backed by StarTech.com’s lifetime warranty and comes in assorted/white colour options.

Suitable for

• Connecting two LP4-powered CD/DVD-ROM drives to one power connector
• Powering two IDE hard drives from a single LP4/Molex output
• Adding an extra LP4-powered peripheral inside a PC with limited power connectors

Key specifications

• Manufacturer: StarTech.com
• Model: PYO2L
• Connector 1: Molex (4-pin) male (LP4)
• Connector 2: 2 × LP4 (4-pin) female
• Cable length: 0.23 m
• Weight: 0.3 kg
• Product colour: Assorted colours, White
• EAN: 0065030771375

How to use

Turn off and unplug the computer before installing. Insert the male LP4/Molex plug into an available LP4 power output from the power supply, then connect the two LP4 female sockets to the power ports of the peripheral drives. Ensure connectors are fully seated and oriented correctly to avoid bent pins. After connections are made, close the case, reconnect power, and power on the system to verify device operation.

Recommendations

Do not exceed the power supply’s current limits for the original LP4 rail—check device power requirements to avoid overloading the connector. Use this splitter only for compatible 4-pin LP4/Molex powered internal peripherals.