Account Contact
Je winkelwagen
DPD & FedEx – bezorgdatum op de productpagina.
Hulp nodig? DistriNode AI helpt je met alles op onze site.

SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s

SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
60 mnd.
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
67,12 €
PDF
PDF
Voorraad 2143 Code 1470660 Model AT-SP10LRA/I-BO Garantie 5 jaar

Bezorging & retourneren

Verwachte bezorgdatum dinsdag 8 december
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

Stel een vraag – de AI-assistent antwoordt direct.

Omschrijving

The BlueOptics AT-SP10LRA/I-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s networks. It uses an LC duplex connector and single-mode fiber optics, supports a 10,000 Mbit/s data rate and is housed in a durable silver metal casing. The module is lightweight (approx. 20 g) and has a high mean time between failures (MTBF) of 1,000,000 hours to provide long-term operation in network environments.

Advantages

This transceiver adheres to MSA-compatible SFP+ form-factor standards for broad interoperability and physical compatibility with equipment that supports 10G SFP+ modules. The metal housing offers mechanical stability and thermal dissipation while the module’s lightweight design simplifies handling and installation. Its specified MTBF indicates suitability for continuous operation and reduced maintenance intervals.

Suitable for

  • 10 Gigabit Ethernet uplinks and inter-switch links
  • High-speed connections between switches, routers, and storage systems
  • Longer-distance single-mode fiber links within campus and carrier networks

Key specifications

  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Connector type: LC duplex (single-mode fiber)
  • Housing: metal, silver colour
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours

How to use

Insert the SFP+ transceiver into a compatible SFP+ slot on a switch, router or other network device while the device is powered down or following the manufacturer’s hot-plug guidelines. Connect the LC duplex single-mode fiber patch cable ensuring correct Tx/Rx orientation. Verify link status and data rate through the host device’s interface. If the device supports Digital Diagnostics Monitoring (DDM/DOM), enable or check diagnostics via the host system to monitor parameters such as optical power and temperature where supported.

Recommendations

Use single-mode LC duplex fiber patch cords rated for 10G operation and follow the equipment vendor’s compatibility list. Ensure fiber connectors are clean and that patch cords are routed to avoid sharp bends. Confirm that the host hardware supports SFP+ modules of this specification and, if remote diagnostics are required, that DDM/DOM is enabled and supported by the host device.

Belangrijkste kenmerken
  • 10 Gigabit Ethernet uplinks and inter-switch links
  • High-speed connections between switches, routers, and storage systems
  • Longer-distance single-mode fiber links within campus and carrier networks
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Connector type: LC duplex (single-mode fiber)
  • Housing: metal, silver colour
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours

Specificaties

Specificaties
Bedrijfstemperatuur (T-T)
0 - 70
Ethernet LAN
Ja
Gemiddelde tijd tussen storingen (MTBF)
1000000 h
Gewicht
0.02 kg
Gewicht verpakking
30 g
Glasvezel-ethernetbekabelingstechnologie
10GBASE
Glasvezelconnector
LC
Interfacetype
SFP+
Materiaal behuizing
Metaal
Maximale bedrijfstemperatuur
70 °C
Maximale overdrachtsafstand
10000 m
Maximale overdrachtssnelheid
10000 Mbit/s
Minimale bedrijfstemperatuur
0 °C
Productkleur
Silver
Rx-golflengte (max.)
1310 nm
SFP-transceiverstandaard
LR
Singlemode-vezel (SMF) ondersteund
Ja
Tx-golflengte (max.)
1310 nm
Type ethernetinterface
10 Gigabit Ethernet
Type SFP-transceiver
Glasvezel
Prijsverloop van de afgelopen 6 maanden
SFP+ transceivermodule BlueOptics AT-SP10LRA/I-BO 10000 Mbit/s
Actueel
67,12 €
Laagste 7 d
66,10 €
Hoogste 7 d
67,12 €
Wijziging 24 uur
0,00 €   0%
Wijziging 7 d
+1,02 €   +2%
Wijziging 30 d
0,00 €   0%

Review schrijven

Beoordeling *
Opmerking: HTML wordt niet omgezet!

Meer BLUEOPTICS producten in deze categorie

12

Populaire producten in deze categorie

8
Verkoper / Vendeur : UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litouwen / Lituanie · Ondernemingsnr. / N° d’entreprise 303192950 · Btw-nr. / N° TVA LT100008198612 · Verzending vanuit de EU (Litouwen) / Expédition depuis l’UE (Lituanie)
WhatsApp
Messenger
Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.
Alle categorieën