SFP+-transceivermodule BlueOptics 1G2CG-BO glasvezel 10000 Mbit/s

The BlueOptics 1G2CG-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s network links. The module supports an optical interface in the compact SFP+ form factor and is intended for use in compatible switches, routers and transceivers that accept SFP+ modules. The transceiver is finished in a silver housing and has a stated weight of 20 g. Product compliance with CE, FCC and RoHS standards is indicated for regulatory and safety considerations.

Advantages

This SFP+ transceiver offers support for a maximum data transfer rate of 10000 Mbit/s and a compact SFP+ interface that simplifies installation in standard equipment bays. Its metal housing provides mechanical stability and the lightweight design facilitates handling and mounting. Compliance with CE, FCC and RoHS ensures the module meets common regulatory requirements for electronic network components.

Suitable for

• High-speed fiber uplinks between switches and aggregation devices
• Server-to-switch connections in data center or enterprise networks
• Upgrading existing SFP+ ports to 10 Gbit/s fiber links
• Applications requiring a compact transceiver form factor

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Product colour: Silver
• Weight: 0.02 kg
• Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics 1G2CG-BO by inserting the module into an empty SFP+ cage on the host device until it clicks into place, following the host manufacturer's guidance. Connect the appropriate fiber optic cable to the module's optical port, ensuring proper connector type and fiber grade for the link. Verify link status via the host device management interface and monitor for errors. When removing the module, power down or disable the port if recommended by the equipment vendor, then depress the release mechanism and pull the module straight out.

Recommendations

Use compatible single‑mode or multi‑mode fiber and matching connectors as required by the network design. Observe ESD precautions when handling the transceiver and keep the dust caps on unused optical ports to protect optical surfaces. Confirm transceiver compatibility with the host device firmware and supported link distances before deployment.