Patchkabel Equip Cat.6A S/FTP RJ-45 7,5 m paars

The Equip Cat.6A S/FTP Patch Cord is built from materials selected for stable data transmission and tested to meet industry standards. Designed for 10GBase-T networks, this 7.5 m RJ‑45 patch cable supports data rates up to 10000 Mbit/s and uses S/FTP shielding and gold‑plated contacts to reduce interference and ensure reliable signal integrity in demanding network environments. The cable is purple in color and weighs approximately 0.24 kg.

Advantages

S/FTP shielding provides enhanced protection against electromagnetic interference and crosstalk. Category 6A specification and 10GBase-T support enable higher bandwidth and improved signal‑to‑noise margin for error‑reduced transmission at up to 10 Gbit/s. Gold‑plated RJ‑45 contacts improve contact reliability and corrosion resistance. The 7.5 m length offers flexibility for patching within racks and between nearby equipment.

Suitable for

• 10GBase-T networks and high‑speed LAN connections
• Server rooms, data centers and network racks
• Office cabling and workstation patching
• Environments requiring reduced interference and stable throughput

Key specifications

• Cable length: 7.5 m
• Connectors: RJ‑45 to RJ‑45
• Data rate: up to 10000 Mbit/s (10 Gbit/s)
• Cabling technology: 10GBase‑T, Category 6A
• Shielding: S/FTP (shielded/foiled twisted pair)
• Contacts: gold‑plated
• Product colour: Purple
• Weight: 0.24 kg

How to use

Connect one RJ‑45 plug to the network port of a switch, router or patch panel and the other RJ‑45 plug to the device to be networked. Ensure connectors click into place to confirm proper seating. Use the 7.5 m length to route between nearby racks, panels or workstations, avoiding tight bends and sharp kinks. For best performance, maintain proper cable management and avoid running the cable parallel to high‑voltage power lines.

Recommendations

For optimal 10G performance, use within the specified channel length limits of your network infrastructure and verify that connected hardware (switches, NICs) supports 10GBase‑T. Inspect connectors before installation and replace the cable if the shielding or plugs are damaged.