HDMI-kabel Microconnect HDM19191V2.0A 1 m 4K 18 Gbit/s

The MicroConnect HDM19191V2.0A is a 1 m HDMI 2.0 cable designed for high-definition audio and video transmission. It supports data transfer rates up to 18 Gbit/s and resolutions up to 4K@60Hz with HDCP 2.2, CEC, ARC and 3D compatibility. The cable has gold-plated connectors, a black finish and a 270° angled plug that limits protrusion from the wall to approximately 16 mm, making it suitable for installations close to displays or other devices mounted near walls.

Advantages

This HDMI cable provides High Speed performance with support for 4K@60Hz and up to 18 Gbit/s throughput. The gold-plated connectors improve contact reliability and corrosion resistance. The 270° angled plug reduces the required clearance behind wall-mounted displays or devices, enabling neater installations in tight spaces. It also supports HDCP 2.2, CEC, ARC and 3D for broad compatibility with modern AV equipment.

Suitable for

• Connecting 4K TVs and monitors to set-top boxes, media players or computers
• Wall-mounted displays where rear clearance is limited
• Home cinema setups that require ARC and HDCP 2.2 support

Key specifications

• HDMI version: 2.0
• Maximum data rate: 18 Gbit/s
• Maximum resolution: up to 3840 x 2160 (4K) at 60 Hz
• Supported features: HDCP 2.2, CEC, ARC, 3D
• Cable length: 1 m
• Connector type: HDMI Type A (standard) — both ends
• Connector finish: gold-plated
• Colour: black
• Angled plug: 270°, approx. 16 mm wall protrusion
• Weight: approx. 0.05 kg

How to use

Connect one end of the HDMI cable to the HDMI output of your source device (for example a set-top box, Blu-ray player or computer) and the other end to the HDMI input of your display (TV or monitor). Ensure both devices are powered off or that inputs are switched appropriately before connecting. After connection, select the corresponding HDMI input on the display and verify resolution and audio settings in the device menus to match 4K@60Hz if supported.

Recommendations

For optimal performance, avoid sharp bends near the connectors and keep the cable run away from strong electromagnetic sources. Use the 270° angled plug where rear clearance is limited to maintain a flush installation with wall-mounted displays.